Cleaning The Post Motor Filter; Cyclone Seperator - Beko VCS 5125 AR User Manual

4 Cleaning and care
2. Remove the seperator.
3. Remove the motor and sponge filter from the
separator.
4. Wash the pre-motor filter with warm water until
it gets clean (let the clean filter to dry 24 hours).
4.3 Cleaning the post motor
filter
1. Open the post motor filter cover.
Upright Vacuum Cleaner / User Manual
2. Remove the post motor filter by lifting it.
3. Wash the post motor filter with warm water
until it gets clean (let the clean filter to dry 24
hours).
4. After the filters are completely dry, put them
back into the main body.

4.4 Cyclone seperator

1. Open the filter cover.
2. Hold and turn the seperator clockwise from its
handles and take it out from the dust container.
3. Clean the cyclone with a dry cloth.
13 / EN