S
PECIFICATIONS
2.5.2
The system environment must allow sufficient air flow to limit maximum surface
temperatures as defined. AFR can be affected by workload and operating
temperature. See Section 2.6 on page 10 for further details.
Temperature & Humidity
Operating
Humidity
Thermal Gradient
Humidity Gradient
Non-operating Temperature
Humidity
Thermal Gradient
Humidity Gradient
2.5.3
Figure 2-2. Drive Base Casting Thermocouple Location
8
Temperature and Humidity
0C to 65C on the base casting (see Drive Base Casting
Thermocouple Location below)
5-95% RH non-condensing
37.7C (maximum wet bulb)
20C/hour (maximum)
20%/hour (maximum)
-40C to 70C on the base casting (see Drive Base Casting
Thermocouple Location below)
5-95% RH non-condensing
35C (maximum wet bulb)
30C/hour (maximum)
20%/hour (maximum)
Thermocouple Location
Component
D
RIVE BASE CASTING
RELEASED 5/8/17 (WD CONFIDENTIAL)
Location
#1, D
B
C
RIVE
ASE
ASTING
L
OCATION
PR1000M
T
HERMOCOUPLE
2679-800020-A03