D-Link DWL-810 Quick Installation Manual page 6

You have completed the Configuration of the DWL-810!
Appendix
Assigning a Static IP Address in Windows
To assign a Static IP Address to the laptop or computer that you are using to configure
the DWL-810, please do the following:
Note: The following screens are taken using
Windows XP. Your screens may look similar.
Go to Start > Double- click on
Control Panel > Double-click on
Network Connections > Right-
click on Local Area Connections
> Click Properties
Highlight Internet Protocol (TCP/IP)
Click Properties
Select Use the following IP address
the Internet Protocol (TCP/IP) Properties
window
Input your IP address and subnet
mask. (The IP Address must be within
the same range as the DWL-810. The IP
Address of the DWL-810 is 192.168.0.30.
You can assign 192.168.0.51 for your
computer. No two computers can have
the same IP Address. Assign a subnet
mask of 255.255.255.0.)
Click OK
in