Replacing The Oven Light; Replacing The Door Seal; After-Sales Service - Bosch HSS352A Operating Instructions Manual

Faults, repairs

Replacing the oven light

If the oven light fails, it must be replaced.
This is what to do:
1.
2.
3.
4.
5.
6.
7.
The glass cover of the oven light can also be replaced.
The glass panel is replaced as described in the Appliance
Replacing the glass panel
on the oven door Care section "Cleaning the glass panels".
If the door seal is defective, it must be replaced.

Replacing the door seal

1.
2.
3.
Switch off the cooker fuse in the fuse box.
Place a tea towel in the cold oven to prevent
damage.
Unscrew the glass cover in the oven interior by
turning it in an anticlockwise direction.
Replace the oven light with a light of the same
type (25W / 230V / E14).
Insert the glass cover again.
Remove the tea towel.
Switch on the fuse again.
Open the oven door.
Remove the old door seal.
4 hooks are attached to the door seal. Attach the new
door seal to these hooks on the inside of the oven door
and press into position.
46

After-sales service

After-sales Our after-sales service is there for you in the event that
your appliance needs to be repaired. Your nearest
service
appliance service centre can be found in the phone book,
should your appliance need repairing. The specified after-
sales service centres will also be happy to inform you of
a service point in your local area.
E number and
When contacting the after-sales service, always specify
FD number
the product number (E no.) and production number
(FD no.) of your appliance. The nameplate containing
these numbers can be found in the drawer in base. Make
a note of these numbers in the space here to save time in
the event of appliance malfunction.
E no.
After-sales service
FD no.
%
47