D-Link AirPremier DWL-2210AP Quick Installation Manual page 9

Using a Static IP Address to Connect to
the DWL-2210AP
To assign a Static IP Address on the computer that you are using to configure the
DWL-2210AP, follow the steps for the appropriate operating system:
Windows XP:
Go to Start, click on
double-click on Network
right-click on Local Area Connections
and select Properties.
Highlight Internet Protocol (TCP/IP)
Click Properties
Input a static IP address in the same range
as the DWL-2210AP's IP address of
192.168.0.50. Each computer/device must
have a unique IP address.
Select Use the following IP address
IP address: 192.168.0.51
Subnet mask:
Click OK
Control Panel
Connections,
255.255.255.0
9