D-Link AirPremier DWL-2210AP Quick Installation Manual page 11

Using a Static IP Address to Connect to
the DWL-2210AP
Windows Me & 98SE:
Go to Start > Settings
Double-click on the
associated with the Network Adapter installed
on your system > select
Click Internet Protocol (TCP/IP)
Click Properties
Input a static IP address in the same range
as the DWL-2210AP's IP address of
192.168.0.50. Each computer/device must
have a unique IP address.
Select Specify IP Address
IP address: 192.168.0.52
Subnet mask:
Click OK
> Control Panel
Local Area Connection
Properties
255.255.255.0
>
11