D-Link AirPremier DWL-2210AP Quick Installation Manual page 3

Connecting the DWL-2210AP to Your
Network (continued)
Connecting PoE (Power over Ethernet) to the DWL-2210AP
• Step 1: Connect one end of an Ethernet cable (included with your package) to the
LAN port on the DWL-2210AP and the other end of the Ethernet cable to the port
labeled P+DATA OUT on the PoE base unit.
• Step 2: Connect another Ethernet cable from the
to your router/switch or to a PC.
• Step 3: Attach the power adapter to the connector labeled POWER IN on the PoE
base unit. Attach the power cord to the power adapter and into an electrical outlet.
DATA IN
3
port on the PoE base unit