E. Securing the Cord to the Base
• With the fan still on its side, locate the cord holding bracket on
the bottom of the base.
• Gently pull any slack out of the power cord, and carefully
work the cord into the bracket slots and out through the exit
hole in the base. Fig. 7. Be careful not to break either of the
bracket slots.
• Return the tower fan to its upright position.
Note: Do not operate the tower fan unless it is in its proper,
upright position.
OPERATING INSTRUCTIONS
I. CONTROL PANEL
1.
-ON/OFF KEY
The key is for switching on the fan. The fan will start
at low speed. The numeral 1 will appear in the screen
display.
Press this key again to turn fan off.
2.
-TIMER KEY
Choose from 1 to 8 hours. Press
press
or
3.
-OSCILLATION KEY
Press this key to oscillate the fan. To fix the fan direction, press this key again to
stop the oscillation when the fan body is pointing in the desired direction. DO
NOT attempt to rotate the fan body by hand! Doing so will damage the
oscillation mechanism.
4.
- increases the fan speed. When the fan is on, press this button to increase
the fan speed. The display screen will show the increase in speed from 1 (Low)
to 2 (Medium) to 3 (High).
-increases the timer hours. After pressing the timer key , press
to increase the timer hours.The selected number of hours will appear briefly on
the display and then the display will return to the fan speed setting. To check the
Timer setting, press the Timer key again.
5.
- decreases the fan speed. When the fan is on, press this button to decrease
the fan speed. The display screen will show the decrease in speed from 3 (High)
to 2 (Medium) to 1 (Low).
- decreases the timer hours. After pressing the timer key , press
button to decrease the timer hours. The selected number of hours will appear
briefly on the display and then the display will return to the fan speed setting.
To check the Timer setting, press the Timer key again.
to increase or decrease the timer.
once for 1-hour timer and
3
Fig. 6
Fig. 7
this button
this