Operations - Bissell CLEANVIEW 2486 Series User Manual

Power ON & Settings
1
Press the red power button with your
foot to turn the vacuum ON
again to turn your vacuum OFF
3
TIP: For optimal carpet cleaning performance, adjust to the lowest practical setting. If
your vacuum is difficult to push, adjust to the next higher setting.
WARNING
To reduce the risk of injury from moving parts while the vacuum is turned ON, always move the vacuum
via the rolling wheels by using the upper handle at the back of the vacuum. Do not carry the vacuum
while it is running. Always place vacuum on floor with handle in upright position when using tools.
NOTE: Brush Roll continues to rotate while tools are in use. Never place fingers under the
vacuum when it is running. Never place PowerFoot on furniture or uneven surfaces. Do
not place vacuum close enough to objects to pull into rotating brush.
NOTE: Certain carpets and low humidity conditions may generate small static discharges.
Static discharges are entirely harmless and are not associated in any way with the main
power supply.
6
www.BISSELL.com
2
and once
Press the recline pedal and pull handle
.
back towards you.
Turn the dial on the foot of the vacuum to the
desired setting. If the dial is difficult to turn, tilt the
vacuum back slightly to take the weight off the foot
while turning.
Lowest setting –
Medium setting – For medium pile carpet.
Highest setting – For high pile and most shag carpet.
For low pile carpet or bare floors.
To pick up debris, it may be
necessary to move up one setting.