Advertisement
INSTALLATION
2
3
1
4
5
6
7
INSTALLATION CHECKOUT
8
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely
affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
"LEAD FREE" is marked on the back of the faucet signifying its compliance with the United States AB1953
1287541-2A-B
Install the mounting stud(1) into the faucet body base(2).
Insert the washer (3) under the body assembly. Insert the
flexible supply hoses(4) into the sink.
From underside of the sink, place the washers(5, rubber
washer is on the top) and the nut(6) onto mounting stud.
Position the faucet so that the handle is on the right side.
Tighten the nut by tool(7) to secure the faucet.
Attach the hoses to water supplies. The hose with "COLD"
label is for cold water.
Ensure that all connections tightened and the handle is in
the off position.
Open the drain. Turn on main water supply and check for
leaks. Repair as required.
Remove the aerator(8). Turn the faucet handle on. Run hot
and cold water through the spout for about one minute to
remove any debris. Remove debris from the aerator. Shut
off the faucet and reinstall the aerator.
SERVICE PARTS
1146748
**Color code must be specified when ordering.
2
1287541-2A-B
74053T-4E2
Tube Spout Kitchen Faucet
3002868
1243529**
1103116
1243532**
1073951
1239352
1080817
1239354**
1239358
1209777
1196248
1068126
836549
1228834
TAUT
3008523
833438
1287547**
1209778**
3
Advertisement
