Default Routing; Atm (Asynchronous Transfer Mode); Precise Atm Traffic Shaping; G.hs (Auto-Handshake) - D-Link DSL-500 User Manual

DSL-500 ADSL Router User's Guide

Default Routing

This allows you to choose a default path for incoming data packets for which the
destination address is unknown. This is particularly useful when the Router
functions as the sole connection to the Internet.

ATM (Asynchronous Transfer Mode)

The DSL-500 supports Bridged Ethernet over ATM (RFC1483), IP over ATM
(RFC1577) and PPP over ATM (RFC 2364), and PPP Over Ethernet (RFC 2516).
The Router can support up to eight Virtual Circuit Connections (VCCs).

Precise ATM Traffic Shaping

Traffic shaping is a method of controlling the flow rate of ATM data cells. This
function helps to establish the Quality of Service for ATM data transfer.

G.hs (Auto-handshake)

This allows the Router to automatically choose either the G.lite or G.dmt ADSL
connection standards.

High Performance

Very high rates of data transfer are possible with the Router. Up to 8 Mbps
downstream bit rate using G.dmt.

Full Network Management

The DSL-500 incorporates SNMP (Simple Network Management Protocol)
support for web-based management and text-based network management via an
RS-232 or Telnet connection.

Telnet Connection

The Telnet feature enables a network manager to access the Router's
management software remotely.

Easy Installation

The DSL-500 uses a web-based graphical user interface program for convenient
management access and easy set up. Any common web browser software can be
used to manage the Router.
3