Table of Contents
Advertisement
Remote Control Setup
1
with the backside of the remote
controller facing up, remove the
battery tray from the remote control.
2
Insert the battery provided with the
product to the tray.
• The (+) electrode of the battery
must face upward.
3
Insert the battery tray to the remote
control.
Back
Warning
• a button/coin-shaped battery is used in the
remote control of the product.
• Do not swallow the battery. It may cause
injury, including damage to the internal
organs or death.
• If you accidentally swallowed the
battery, go to the doctor immediately for
emergency treatment. If you fail to receive
first aid within 2 hours after you swallowed
it, you may experience damage to your
internal organs or death in severe cases.
• Keep the battery out of reach of children.
• If the battery tray is not secured firmly,
stop using the product instantly and keep it
away from children.
Caution
• Do not modify the battery arbitrarily. It may
cause a fire or electric shock.
• Misplaced battery may cause an explosion.
• Do not recharge or take apart the battery.
It may result in explosion.
• Do not throw the battery in the fire for
disposal or leave it near the heat. It may
result in explosion.
Note
• If the battery runs out of charge, replace it
with a new one (Cr2025).
• If the remote control does not work as
expected, try to replace the battery or
check the polarity (+, -) of the battery. If
the problem continues, contact the service
Center.
• Dispose of the used battery according to
the environmental regulations.
13
Advertisement
Table of Contents
