Operation - D-Link DKVM-8 User Manual

CHAPTER 3.
Selecting which computer to operate can be done either by On-Screen Display, the select
button, or through keyboard "Hot Key" commands. You will notice that after the DKVM-8
switches to another computer, the mouse will be inoperative for about 1-2 seconds. This
is normal operation and ensures that proper mouse synchronization is established.
Pressing the "Channel" button cycles you through all the ports, including inactive ports.
1 2
Keyboard "Hot Key" Commands
You can also conveniently command the DKVM-8 to switch ports (channel) through
simple keyboard key sequences. To send commands to the DKVM-8, the SCROLL
LOCK key must be pressed twice within 2 seconds.
confirmation. Below are the different commands.
SCROLL SCROLL
LOCK LOCK
SCROLL SCROLL
LOCK LOCK
SCROLL SCROLL
LOCK LOCK
SCROLL SCROLL
LOCK LOCK
SCROLL SCROLL
LOCK LOCK
3 4 5
Switch to Previous Active port
(On the same BANK)
Switch to Next Active port
(On the same BANK)
Switch to Previous BANK
Page
(By default, selects first active port on BANK)
Up
Page
Switch to Next BANK
Down
(By default, selects first active port on that BANK)
x
Y
~ 12 ~
6 7 8
You will hear a beep for
Directly switches to port Y on BANK X
X=0 to F (Hexadecimal), Y=1 to 8

OPERATION