D-Link DHP-100 Quick Installation Manual page 7

Using DHP-100 Encryption Software
(continued)
Click Device
The Device dialog screen provides a list of
your D-Link PowerLine devices connected
to the computer where the utility is running
and average data rate performance of your
powerline network.
In most cases, one device only is listed.
In case you have more, click on one of them
and hit Connect. Make sure that the State
box indicates that your PC is connected to
the same device. Now you are ready to
manage the powerline network connected to
this device, ensure its privacy and measure
its data rate performance.
The progress bar will change into a status bar indicating the network average data rate.
The color of the bar reflects the average performance of the powerline network :
Green : Good performance
Yellow : Average performance
Red : Poor performance
Click Network
The Network dialog screen provides
detailed information about your powerline
network. The text list box shows all
PowerLine devices found on your
powerline network identified by their MAC
addresses. In most cases, one device
only is listed. A second column indicates
their data rate measurements in Mbps.
Press Scan Powerline Network button to
refresh the listed information.
7