D-Link DHP-100 Quick Installation Manual page 6

Installing DHP-100 Encryption
Software (continued)
Restart your computer.
Click Yes
Using DHP-100 Encryption Software
After the computer has restarted, you can now setup encryption for
your DHP-100. By default, the DHP-100 uses 56-bit DES encryption
with a password of "HomePlug". This means that out of the box, the
DHP-100 will automatically work with other DHP-100s. For security
purposes, it is recommended that you change the password. Follow
the steps below to do so.
There should be a D-Link DHP-100 icon on your
desktop
Double-Click on the Icon
(Alternatively, you can go to Start->Program->D-Link PLC->D-Link
Configuration Utility)
6