Configure Dfl-M510; Connect To Dfl-510 - D-Link DFL-M510 Quick Manual

Information security gateway(isg)

Hide thumbs Also See for DFL-M510:

Table of Contents

Configure DFL-M510

The DFL-M510 GUI is a Web-based application that allows you

to manage the DFL-M510. The GUI is a java applet application.

Before accessing the GUI from any PC, note the following:

You must install Java Runtime (1.4.2 or above) as

described below

Pentium 4, 2.0 GHz

512 MB RAM

Refer to the following to log on to the DFL-M510.

4.1 Connect to DFL-M510

After placing the DFL-M510 within your network transparently,

you could use web browser to connect the DFL-M510 with

Java Runtime installed.

Activate your browser.

Then type the default

IP(http://192.168.1.1)

and press enter.

Note:

1. The IP address shown in the example above is the default

setting. If you have change the IP address of the DFL-M510 to

conform to a network, then input that IP address in the web

brower, instead of the default IP address shown.

2. In order for this GUI to fit well on your screen, please adjust

your screen to 1024x768.

Table of Contents