Setup Wizard Complete - D-Link DFL-1100 Installation Manual

DFL-1100 Installation Guide
Step 4 - Set up built-in DHCP
Server
• Disable DHCP Server: If this option is disabled,
then LAN clients must be configured with an IP
address manually.
• Enable DHCP Server: When enabled, this allows
the DFL-1100 to automatically provide the necessary
IP information to all LAN clients configured for
DHCP. The IP range defines the beginning and
ending addresses to provide the clients.
Be sure the IP range does not conflict with any
manually configured network devices or the IP
address of the DFL-1100.
Step 5 - Configure helper
servers
• Time Servers: When enabled, the firewall time will
be synchronized with the NTP servers entered here.
• Syslog Servers: When enabled, the DFL-1100 will
log data to the specified servers.

Setup Wizard Complete

Click on Restart to finalize the configuration.
8
The Setup Wizard