Using The Setup Wizard - D-Link DFL-200 Quick Installation Manual

Network security firewall

Hide thumbs Also See for DFL-200:

When you have completed the steps in this Quick Installation

Guide, your connected network should look similar to this:

Using The Setup Wizard

The DFL-200 provides Web based conﬁ guration. You can

conﬁ gure your DFL-200 through your Netscape Communicator

or Internet Explorer browser in MS Windows, Macintosh or UNIX

based platforms.

Activate your browser. Then type the IP address of the DFL-200

into the Location (for Netscape) or Address (for IE) ﬁ eld and press

"Enter." For example: http://192.168.1.1.

Open your Web browser and

Open your Web browser

Open your Web browser and

type

"http://192.168.1.1"

URL address box. Then press the

Enter

Enter or

Return key.

(The IP Address shown in the example above is the default

setting. If you have changed the IP Address of the DFL-200

to conform to a network, then input that IP Address in the web

browser, instead of the default IP Address shown.)

into the

Table of Contents