ABB TPL65-A30 Operation Manual page 53

Operation Manual / TPL65-A10 / -A30
5 Maintenance / 5.2 Cleaning the filter silencer
If provided
© Copyright 2018 . All rights reserved.
Join connecting rods (81269) using screws (81272). When tightening
u
the screws (81272), ensure that connecting rods (81269) are located
correctly in recesses in filter silencer body (81135). Now tighten
screws (81272) alternately until the following maximum torque is
reached:
Screw
81272
Screw lock nuts (81273) onto screw (81272) and tighten to following
u
torque:
Lock nut
81273
Fit filter strip (81265).
u
HZTL2482_EN
Tightening torque [Nm]
20
Tightening torque [Nm]
40
Revision D April 2018