Whittier Wood 2084GAC Assembly Instructions Manual

Whittier Wood 2084GAC Assembly Instructions Manual

74"w mckenzie 2-drawer center channel console

Advertisement

Model #
2084GAC;
2084CAF
74"W McKenzie
2-Drawer Center
Channel Console
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
CUSTOMER SERVICE
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Fax: 541-687-2060• Email: info@whittierwood.com
P.O. Box 2827
Eugene, OR 97402 USA

IMPORTANT NOTES:

• For normal household use only. Not recommended for commercial use.
• Do not climb, sit or stand on this piece of furniture.
• Do not overload the drawers or shelves.
• Unload items before you move this unit.
Handle the glass plates with care. Glass is fragile.
• Before you begin your project, completely read the Assembly
Instructions.
• This assembly requires two people.
Serious or fatal crushing injuries can occur from furniture tip-over. Use of
tip-over restraints may only reduce but not eliminate the risk of tip-over.
To help prevent tip-over:
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate, do not set TVs or other
heavy objects on top of this product.
Never allow children to climb or hang on drawers, doors or shelves.
Never open more than one drawer at a time.
Warning: At least one tipping restraint kit was included with your piece of
Whittier Wood Furniture. When you receive your furniture, be sure to find
and properly install the tipping restraint(s). If you cannot locate the
restraint(s), please contact us immediately for replacement.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
Production Code:
VN
WARNING
04/16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2084GAC and is the answer not in the manual?

Questions and answers

Summary of Contents for Whittier Wood 2084GAC

  • Page 1 If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you cannot order replacement parts through your dealer, please contact our customer service department.
  • Page 2 74"W McKenzie 2-Drawer Center Channel Console Parts List Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and part name. Part Description Quantity Top Assembly (attached) Case Adjustable Shelf (installed)
  • Page 3 74"W McKenzie 2-Drawer Center Channel Console Parts List Part Description Quantity #8 x 7/8" Black Lo-Profile Screw (inserted) #8 x 1-1/4" Black Screw (inserted) #8 x 1-5/8" Black Screw (inserted) #8 x 1-1/2" Machine Screw Tuscan (installed) #10 x 3/4" Pan Head Screw (inserted) Hinge (attached) Drawer Stop (attached) Insert Nut (inserted)
  • Page 4 74"W McKenzie 2-Drawer Center Channel Console Assembly Instructions Tool Required: Phillips Screwdriver, Pencil. Place the console at its final destination. Rotate the Adjustable Glides (ZJ) found at the corners of the unit and (ZI) at the bottom of the Center Foot until the unit is level. See Figure 1. Fig.
  • Page 5 74"W McKenzie 2-Drawer Center Channel Console Assembly Instructions To insert your media components and access wires more easily, you may want to remove the Removable Backs (D). To do so, unlock the Turn Buttons (ZF) as shown in Figures 3 and 3b. Slide the Backs away and place them off to the side.
  • Page 6 Before you begin this assembly, identify each part and make sure the quantities received match what is on this list. If you need to replace a part, contact Whittier Wood Furniture customer service and refer to the following list for its name and letter code.
  • Page 7 74"W McKenzie 2-Drawer Center Channel Console Assembly Instructions Move the item back into position against the wall and reach underneath the piece of furniture to grasp the loop in the free end of the strap. Pull the free end of the strap until portion between the Cam Buckle (A) and the back apron of the item is tight.

This manual is also suitable for:

2084caf

Table of Contents