Download Print this page

Whittier Wood 2074AUF Assembly Instructions Manual

73 inch w mckenzie center channel console

Advertisement

Quick Links

Model #
2074AUF
73"W McKenzie
Center Channel
Console
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions and Finishing Hints before
you begin your project.
CALL US FIRST!
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
For a replacement part, directly contact the Whittier
Wood Product customer service department by
phone, fax, mail or email.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.
800-653-3336
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
from furniture tip-over. To help prevent tip-over:
For normal household use only. Not recommended
for commercial use.
Unload items before you move this unit.
Before you load or move this unit, check to make
sure all screws and supports are tight.
Do not climb, sit or stand on this piece of furniture.
Do not not overload drawers or shelves on this unit.
Handle the glass plates with care. Glass is fragile.
Before you begin your project, completely read the
Assembly Instructions and Finishing Hints.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on
a cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
This Assembly requires two people.
Do not return this item to the store.
To Order: Provide the furniture model number (upper
left corner of this page), the part letter, production
code, quantity needed, reason for replacement, your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
• Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
Production Code:
VN
Serious or fatal crushing injuries can occur
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
Never allow children to climb or hang on drawers,
doors or shelves.
Never open more than one drawer at a time.
Use of tip-over restraints may only reduce
but not eliminate the risk of tip-over.
IMPORTANT NOTES:
.
07/10

Advertisement

loading
Need help?

Need help?

Do you have a question about the 2074AUF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Whittier Wood 2074AUF

  • Page 1 Model # 2074AUF Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over: Place heaviest items in the bottom drawers. Unless specifically designed to accommodate, 73"W McKenzie do not set TVs or other heavy objects on top of this product.
  • Page 2 2074AUF 73"W McKenzie Center Channel Console — Parts List Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and model name. A — Top B —...
  • Page 3 2074AUF 73"W McKenzie Center Channel Console — Parts List continued Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and model name. ZD — Assembled Foot ZE —...
  • Page 4 2074AUF 73"W McKenzie Center Channel Console Assembly Instructions Tool Required: Phillips Screwdriver x 24 Fig. 1a Fig. 1 Fig. 1b DO NOT LEAN ON THE GLASS AT ANY TIME. 1. To finish the Glass Door Frame (F), you must first remove the glass. Remove the door from its hinges and lay it face-down on a clean, protected surface.
  • Page 5 To move the Adjustable Shelves (B, C), remove the #6 x 1/2" Undercut Screws (O) and the Shelves (B, C). Reposition the Shelf Brackets (N) to the desired positions, replace the shelves and insert the screws. See Figures 5 and 5a. 2074AUF — Page 5 — 07/10...
  • Page 6 Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See Figures 6c and 6d. Repeat this procedure to attach the second tipping restraint. If you cannot locate two studs, purchase the proper wall attachment hardware for your type of wall and secure the unit. 2074AUF — Page 6 — 07/10...
  • Page 7: Getting Started

    Finishing Hints Choosing the Finish: Rubber Tack cloth #220 & #320 1. Choose a finish that will meet your expectations for gloves sandpaper Drop cloth the product you are finishing. Are you matching Rags Mineral spirits Paint brushes existing furniture or do you want a “natural” finish? Paper towels (bristle and Masking Tape...