D-Link DCF-560M User Manual page 19

Configuring Remote Access Server (RAS)
1. Click Start", Settings", and then
" "
Control Panel'
"
2. Double-click the Network icon. Then click
the Services" Tab.
"
3. From the Network Services list, select
Remote Access Service and then click
Properties" If Remote Access Service is
"
not listed, perform the following steps;
otherwise, proceed to step 9:
4. Click the Services tab, and then click
5. Select Remote Access Service from the list,
and then click OK".
"
6. Provide your Windows NT Setup disks if
instructed to.
— 19 —
Add".
"