D-Link DCF-560M User Manual page 17

7. In the Network Protocols box, select
TCP/IP Protocol and clear all other options.
8. Click Next" three times to start installing
"
the selected components.
9. In the Windows NT Setup box, enter the
directory where your Windows NT source
files are located and then click
10. In the MS Loopback Adapter Card Setup
dialog box, click Continue". The default
"
frame type will be selected.
11. In the TCP/IP Setup dialog box, click
when asked to use DHCP.
12. In the Microsoft TCP/IP Properties box,
click the IP Address" tab.
"
13. Make sure MS Loopback Adapter is
selected.
— 17 —
Continue".
"
No"
"