D-Link DCF-560M User Manual page 16

Install network components
1. Click Start", Settings", and then
" "
Control Panel".
"
2. Double-click the Network icon. If you see a
Network Configuration Wizard, then continue
below. Otherwise, skip to the next section
because networking is already installed.
3. In the Network Configuration box, click
Yes".
"
4. Select Wired to the network, clear Remote
access to the network, and then click
Next".
"
5. Click Select from list".
"
6. In the Network Adapters box, select MS
Loopback Adapter and click
— 16 —
Next".
"