WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the stand.
2
Remove the
system-board
3
Remove the
back
cover.
4
Remove the
base
cover.
5
Remove the
rear-I/O
bracket.
Procedure
1
Disconnect the speaker cable from the system board.
2
Remove the nine screws (M3x4+7.1) that secure the speakers to the display-assembly base.
3
Remove the speaker cable from the routing guide on the display-assembly base.
4
Lift the speakers and the speaker cable off the display-assembly base.
58
Removing the speakers
computer. After working inside your computer, follow the instructions in
shield.
Removing the speakers
www.dell.com/
34
After working inside