Procedure
NOTE:
The following procedure only applies to computers shipped with Full High Definition (FHD) displays.
1
Align the screw holes on the system board with the screw holes on the display-assembly base.
2
Replace the nine screws (M3x5) that secure the system board to the display-assembly base.
3
Connect the power-adapter cable to the system board.
4
Connect the display-backlight cable to the system board.
5
Connect the camera cable to the system board.
6
Connect the fan cable to the system board.
7
Connect the I/O-board cable to the system board.
8
Connect the I/O-board power cable to the system board.
9
Connect the headset-port cable to the system board.
10
Connect the speaker cable to the system board.
11
Connect the microphones cable to the system board.
12
Connect the power-button board cable to the system board and close the latch to secure the cable.
Replacing the system board
77