Aeromotive 11703 Installation Instructions

Installation of this product requires detailed knowledge of automotive
systems and repair procedures. We recommend that this installation be carried
out by a qualified automotive technician.
Installation of this product requires handling of gasoline. Ensure you are
working in a well ventilated area with an approved fire extinguisher nearby.
Extinguish all open flames, prohibit smoking and eliminate all sources of ignition
in the area of the vehicle before proceeding with the installation.
When installing this product, wear eye goggles and other safety apparel as
needed to protect yourself from debris and sprayed gasoline.
The fuel system is under pressure. Do not open the fuel system until the
pressure has been relieved. Refer to the appropriate vehicle service manual for
the procedure and precautions for relieving the fuel system pressure.
The following steps are typical of most installations:
1. Allow the vehicle to cool.
2. Using the bracket as a guide, find a suitable location to mount the component.
3. Using the base of the bracket as a guide, drill two ¼" diameter holes 2" apart. Attach the base of the
mounting bracket to the vehicle using two ¼" bolts (not provided).
AEROMOTIVE
Part # 11703
2-1/2" BRACKET
INSTALLATION INSTRUCTIONS
CAUTION:
WARNING!