Connect The Dsc-350F To Your Computer; Windows Xp Instructions - D-Link DSC-350 Quick Install Manual

Connect the DSC-350F to your Computer

§ After your computer has restarted, remove the USB cable from the
package and connect one end to your computer and the other end to
the DSC-350F.
§ Windows will now detect the DSC-350F and load the appropriate
drivers. If Windows does not load the drivers, start again at #2.

Windows XP Instructions

§ Users of Windows XP will need to follow these instructions to
complete the driver installation
§ When the "Found New
Hardware Wizard" starts,
press "Next" to continue.