Section 6
Removing, repairing and exchanging
6.3
6.4
46
Removing protection relay
1.
Turn off the power.
2.
Detach the plug-in unit from the case.
3.
Disconnect the wiring.
4.
Loosen the four M5 fixing screws.
A070582 V5 EN
Figure 35:
Loosening the M5 screws
5.
Detach the case from the panel cut-out.
Sending protection relay for repair
•
In case of product problems, contact the nearest ABB office or representative for
consultation and instructions.
1MRS757452 D
611 series
Installation Manual