ABB Relion 611 Series Installation Manual page 36

Hide thumbs Also See for Relion 611 Series:

Table of Contents

Section 4

Mounting

GUID-A31DED88-2536-472A-813C-37086D74870D V1 EN

Figure 18:

Wall mounted protection relay

A 214 mm

B 177 mm

C 270 mm

Minimum of 50 mm space is needed between two kits.

When connecting the wires, a wall-mounted protection relay can be pulled out and

turned 45° (or 90°) degrees downwards or upwards.

•

To release the protection relay for pulling it out, push the locks beside the

mounting frame.

•

To rotate the protection relay, loosen the knurled-head screws in the rails.

1MRS757452 D

611 series

Installation Manual

Table of Contents