Step 2 - Door Reversing - Haier HC46SF10SV User Manual

INSTALLATION REQUIREMENTS

STEP 2 - DOOR REVERSING

WARNING
to follow these instructions, leaving off parts, or overtightening screws,
can lead to the door falling off and result in injury and property damage.
If you want the refrigerator door to open from the opposite side, you can
reverse the door swing.
A Hole Plugs
B Cover
C Top Hinge screws
D Top Hinge
1. Remove any loose items in the refrigerator, and then gently lay the
refrigerator on its back.
2 Using a flat-blade screwdriver, gently insert the blade under the top hinge
cover and pry up to remove.
3. Using a Phillips -head
screwdriver, remove the two
screws from the top hinge
plate, and then remove the
top hinge.
4. Remove the hole plugs from the opposite side of the cabinet top, and
insert them into the holes from which you removed the hinge screws.
5. Using a Phillips-head screwdriver, remove the three screws attaching the
hinge plate to the bottom of the refrigerator cabinet, and then remove
the hinge.
10
(Optional)
Follow all steps when reversing the door swing. Failure
A
F
B
B
C
D
E
E Bottom Hinge
F Bottom Hinge Screws
A
A Top Hinge Screws
B Top Hinge Plate
C Top Hinge Pin
C
49-60797