Reversing The Door - Haier HT18TS77SE User Manual

REVERSING THE DOOR

DOOR SWING REVERSAL
On black or white models, the door hinges and
handles can be reversed to accommodate your
needs.
NOTE: Door reversal is not available on stainless
steel door models.
REMOVING THE HANDLES
Please refer to the appropriate Door Handle
Installation section to determine how to remove
the handles from your refrigerator.
REMOVING DOORS AND HINGES
1. Use adhesive tape to secure both sides of the
freezer and refrigerator doors to the sides of the
cabinet. (Fig.6)
Fig. 6
2. Remove the hinge cover screw and the top hinge
cover. (Fig. 7)
3. Remove the two bolts that mount the top hinge
to the cabinet and then remove the hinge by
raising it vertically. (Fig. 7)
Hinge Cover Screw
Fig. 7
4. Carefully remove the adhesive tape holding the
freezer door to the cabinet while holding the
door to the cabinet.
Hinge Cover
Bolts
Top Hinge
Thimble Hole
PAGE 10 • SET UP & USE
5. Remove the door by (a) pulling the top of the
door away from the cabinet and (b) lifting it at
the same time. (Fig. 8)
Fig. 8
6. Move the door stop on the bottom of the door
to the opposite side and secure with original
screws, then place the door aside.
Fig. 9
7. Unscrew the center hinge pin by rotating
counterclockwise, being careful not to lose the
spacers from the top section of the pin. (Fig. 10)
8. Remove the refrigerator door in the same
manner as the freezer door, first removing
the tape and then lifting up and away from the
cabinet. (Fig. 10) Relocate the door stop on the
bottom of the door to the opposite side of the
door. (Fig. 9) Place the door aside.
Fig. 10
9. Remove the center hinge and spacer. (Fig. 11)
Fig. 11