Reversing The Door Swing - Haier HBP08GNAWW User Manual

Bottom mount
Table of Contents

Advertisement

Available languages

Available languages

English

Reversing the Door Swing

Left/right door opening method:
• This product provides the reversing of the left/right door opening.
You can select your preference of door opening by following the
procedure to make the change.
Dismantling:
(see fig. # 1)
1. Fix refrigerator and freezer door by sticking adhesive tape on both
sides to hold doors in place.
2. As shown in fig. 1, dismantle the hinge on the lower part of freezer
door with a phillips head screwdriver. Remove the two screws from the
hinge. Take out the hinge, and keep it in a safe place.
3. Remove the bottom hinge axle pin by twisting it counter clockwise and
fix in opposite hole (see fig. # 1).
4. Remove the adhesive tape on freezer door, take the door down, and
carefully put it aside.
5. As shown in fig. 2, dismantle two screws of the central hinge, take
down the central hinge, and keep them in a safe place.
6. Remove the adhesive tape on refrigerator door, lift and take down
refrigerator door, and carefully put it aside.
7. Remove the axle pin from the top right side of the refrigerator door and
install it on the left side.
Bottom Hinge
Center Hinge
7
fig. # 1
fig. # 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hbp08gna

Table of Contents