Ip Filter Rule Configuration - Caimore CM520-86WG User Manual

Xiamen Caimore Communication Technology Co.,Ltd
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
------------------------------------------------------------------------------
----------------------------------------

Filter mode: Client IP filtering and MAC address filtering, client can select
to their actual need.
 Client IP filtering: Filter data according to IP address base on appointed
policy to admit or prevent corresponding IP address data。
 MAC filtering: Filter data according to MAC address base on appointed
policy to admit or prevent corresponding MAC address data.
Running Rules: This device has two kinds running rules.
Discard matching following rule data packets: data packets comply to
following rules are not allowed to go through, other data packets can go through.
Receiving matching following rule data packets: only receive data packets comply to
following rule, others are discarded.

4.2.1.1 IP Filter Rule Configuration

To realize IP address filtering rules appointing, revising and deleting.
 Rule name：it is limited to use characters0-9.a-z.A-Z，also can't repeat name.
 LAN IP：Wireless gateway connected LAN IP address.
 LAN Ports：LAN IP address host corresponding ports scope. Valid value is
 0~65535, please input from small to large.
 WAN IP： Data packet destination IP address.
 WAN Ports：Data packet destination ports scope. Valid value is 0~65535，
please input from small to large.
 Protocol: data packet protocol, here are 3 types:
ALL : All types data packet.
TCP : All TCP packet.
UDP : All UDP packet.
 Direction：data packet direction, used to decide which is original address, there
are 3 types.
IN : From outside network to gateway.
OUT : Transmit from gateway LAN.
IN/OUT: Include IN and OUT
 Interface: Data packet go through interface, such as br0，PPP0 and so on.
Example 1 of IP address filtering:
Tel:+86 592 5901215
Picture 4-2-1
35 web: en.caimore.com
according
35