Pppoe Configuration - Caimore CM520-86WG User Manual

Xiamen Caimore Communication Technology Co.,Ltd
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
------------------------------------------------------------------------------
----------------------------------------
unavailable.
3. Please don't specify IP casually except ISP required to do so, otherwise,
online is unavailable

4.1.2 PPPOE Configuration

PPPOE is the short name of point-to-point protocol over Ethernet, and it can make
Ethernet host connect with remote access concentrator by a simple bridge equipment
 Working Mode:
PPPOE Disable: only use 3G network, do not use PPPoe
PPPOE Only: only use PPPoe, do not use 3G
Static IP: Use Wan for internet
Static IP Master,3G/4G backup: Mainly use PPPoe. When PPPoe is unable to
used, then use 3G
Switch mode
User Name: user name access to public network, supplied by ISP.
Password: Password access to public network, supplied by ISP.
 WAN MASQUERADE: enable WAN MASQUERADE or not
 TCPMSS:
 Specific Static IP: It is specific static IP or not
 Static IP: Specific static IP
 Default Gateway：Static IP gateway address
After dial up succesffuly, the page will show as below picture 4-1-3
Tel:+86 592 5901215
.
Picture 4-1-2
enable TCOMASS or not
25 web: en.caimore.com 25