Kobalt KMP 2040-06 Manual page 5

SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their mean-
ing. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS DESIGNATION
V Volts
A Amperes
Hz Hertz
W Watts
min Minutes
Alternating Current
Direct Current
no No Load Speed
Class II Construction
/min Per Minute
Safety Alert
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Keep Hands and Feet Away
No Reach
No Slope
Keep Bystanders Away
Ricochet
EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits, etc., per
minute
Precautions that involve your safety.
Do not expose to rain or use in damp locations
To reduce the risk of injury user must read and
understand operator's manual before using this product.
Always wear eye protection with side shields marked to
comply with ANSI Z87.1.
Keep hands and feet away from blade and cutting area.
Do not reach hands or feet under mower deck.
Do not operate on inclines greater than 15º. Mow
across the face of slopes, never up and down.
Keep all bystanders at least 100 ft. away.
Pay attention that bystanders are not injured through
foreign objects thrown from the mower.
SAVE THESE INSTRUCTIONS
5