Kobalt KMP 2040-06 Manual page 14

ASSEMBLY INSTRUCTIONS
WARNING
Always remove battery from your tool when you are assembling parts, making adjustments, cleaning,
or when not in use. Removing battery will prevent accidental starting that could cause serious person-
al injury.
5a. To install battery
• Lift and hold up the battery door.
• Place the battery pack in the mower. Align guided ribs on battery pack with grooves in the prod-
uct's battery port.
• Make sure the battery release button snaps in place and that battery is fully seated and secure in
the mower before beginning operation.
• Close the battery door.
5b. To remove battery
• Release the power lever to stop the mower.
• Open the battery door to access the battery compartment.
• Press and hold the battery release button. This will cause the battery to raise out of the tool
slightly.
• Remove battery pack from the mower.
5
Battery release button
Battery door
Safety key
14