Operation Of The Control Panel - Bio Chef SAVANA User Manual

Operation of the Control Panel

AUTOMATIC DRYING
WARM
SELECT DEGREE SYMBOL
Selecting the Drying Mode
TIMER
8.8.
1. Press the button to turn
SET
the food dehydrator on and off.
2. Press the MODE button once to
activate the FAST default. Press the MODE button again to activate the
REGULAR default.
3. The WARM mode automatically activates once either FAST or REGULAR drying
mode is complete.
FAST: Using two motors, the default temperature is 70°C/°F and default time is 2
hours.
REGULAR: Using one motor, the default temperature is 50°C/°F and default time is
10 hours.
The Savana Food Dehydrator features dual fan technology with two independent
500 watt fans, two heating coils and two heat sensors, which can operate
independently or simultaneously. This technology offers quiet operation, even
distribution of air and energy-saving results.
Setting the Temperature and Time
You can manually adjust the temperature and time settings of both the FAST and
REGULAR drying modes to suit your needs or follow the recommendations within
the Drying Times further in this instruction manual.
1. Select the temperature degree symbol by pressing the °C/°F button. The default
display is Celsius.
2. To adjust the temperature, press the SET button and use the + and – buttons to
alter this accordingly.
DISPLAY
TEMP
8.8.8.
ºC/ºF
DISPLAY
TIMER
8.8.
TIME/TEMP
SELECT
DRYING
PRESETS
FAST
Mode
REGULAR
INCREASE
SET
ADJUST
DECREASE
ON/OFF
Mode