Rack Mounting - D-Link Web Smart DES-1228 Quick Installation Manual

Rack Mounting

The DES-1228 can be mounted in an EIA standard-size, 19-inch rack,
which can be placed in a wiring closet with other equipment. Attach the
mounting brackets to both sides of the Switch (one at each side), and
secure them with the provided screws.
Use the screws provided. Then use screws provided with the
equipment rack to mount the Switch in the rack.
Connecting Network Cables
The DES-1228 has 24 ports that support 10/100Mbps Fast Ethernet;
it also has 4 10/100/1000Base-T Ports and 2 Combo SFPs. It runs
full/half duplex transfer mode for 10/100Mbps and full duplex transfer
mode for 1000Mbps. Each port on the DES-1228 supports Auto-
MDI/MDI-X. Auto-MDI/MDI-X is a feature that enables the switch to
auto sense what kind of cable is used on a port (straight or crossover).
This allows any type of cables to be used with the switch regardless
of what device is being connected.
AC Power
The Switch utilizes an AC power supply of 100~240V AC, 50~60Hz. The
power switch is located at the rear of the unit adjacent to the AC power
connector and the system fan. The switch's power supply will adjust to
the local power source automatically and may be turned on without
having any or all LAN segment cables connected.
Mount the Switch in the rack
3