8-port Gigabit Ethernet Switch User's Guide
4 4
C
T
S
ONNECTING
HE
WITCH
This chapter describes how to connect the DGS-3308FG/DGS-3308TG to your Gigabit Ethernet network.
PC to Switch
A PC can be connected to the Switch via a four-pair Category 5 cable or a fiber optic cable. The PC should be connected to
any of the eight ports of the DGS-3308FG/DGS-3308TG.
Figure 4-1. Switch connected to a PC or Workstation
The LED indicators for PC connection are dependent on the LAN card capabilities. If LED indicators are not illuminated
after making a proper connection, check the PC's LAN card, the cable, Switch conditions, and connections.
The following LED indicator state is possible for a PC to Switch connection:
The Link/Act LED indicator lights up upon hooking up a PC that is powered on.
Switch to Switch (other devices)
The Switch can be connected to another switch or other devices (routers, bridges, etc.) via a fiber optic cable.
12