D-Link DGS-3308FG User Manual page 189

8-port Gigabit Ethernet Switch User's Guide
IP Address – Displays the IP addresses statically entered into the IP forwarding table.
Subnet Mask – Displays the corresponding subnet mask for the IP address above.
Gateway IP – Displays the corresponding IP address of the next hop gateway for the IP address above.
Metric – Displays the Routing Information Protocol (RIP) metric. This is the number of hops between the IP
address and the Gateway. This is a number between 1 and 15.
New – A link to Static/Default Routes – Add window.
Delete – Click on this icon to delete the entry.
Static/Default Routes – Add
The following figure and table describe the entry of a Static/Default Route into the Switch's IP routing table. Click on the
Exit icon to return to the Static/Default Routes window.
Items on the screen above include:
IP Address – The IP address to be statically entered into the IP forwarding table.
Subnet Mask – The corresponding subnet mask for the IP address above.
Gateway IP – The corresponding IP address of the next hop gateway for the IP address above.
Metric – The Routing Information Protocol (RIP) metric. This is the number of hops between the IP address and
the Gateway. This is a number between 1 and 15.
Static ARP
The following window is used for the entry of a static Address Resolution Protocol (ARP) into the Switch's static ARP
table.
Figure 7-44. Static/Default Routes – Add screen
179