8-port Gigabit Ethernet Switch User's Guide
Figure 6-52. Setup MAC Address Filter screen
The Action:<
> field can be toggled between Add/Modify and Delete using the space bar.
Enter the VLAN ID in the VID: [ ] field and the MAC address to be filtered in the MAC Address:[
] field. This
address must be a unicast MAC address.
The Source/Destination:<
> field can be toggled between Src. (source), Dst. (destination), and Either.
Highlight APPLY and press Enter to make the changes current. Use Save Changes from the Main Menu to save the
changes to NV-RAM.
Layer 3 (IP Routing) Filtering
The Switch is in IP Routing switch operation mode.
With the Switch configured to Layer 3 Operation mode, both MAC and IP addresses can be entered into the filtering table.
To enter an address, highlight Filtering from the Main Menu and press Enter.
104