Creating Lte Wan Connection - D-Link DIR-816 User Manual

DIR-816 Wireless AC750 Dual Band Router with 3G/LTE
Support and USB Port
User Manual

Creating LTE WAN Connection

!
For the USB modem Megafon M100-1, please reboot the router after creating the WAN
connection.
If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to
creating an LTE WAN connection, go to the USB modem menu and enter the PIN code
page displayed (see the USB Modem section, page 145). Then go to the Connections Setup /
WAN page and click the ADD button in the Connections List section. On the opened page, go to
the All Settings tab. Then select the relevant value from the Connection type drop-down list
and specify the needed values.
Figure 83. The page for creating a new LTE connection. Selecting a connection type.
Parameter
Enable connection
Connection name
9 For some models of LTE USB modems it is required to disable the PIN code check on the SIM card prior to
connecting the USB modem to the router.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 98 of 215
Configuring via Web-based Interface
Description
9
on the