Telnet - D-Link DIR-816 User Manual
Wireless ac750 dual band router with 3g / lte support and usb port
Hide thumbs
Also See for DIR-816:
- Quick installation manual (21 pages) ,
- User manual (92 pages) ,
- Quick installation manual (45 pages)
Table of Contents
Advertisement
DIR-816 Wireless AC750 Dual Band Router with 3G/LTE
Support and USB Port
User Manual
Telnet
On the System / Telnet page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is enabled.
To disable access via TELNET, move the Enable Telnet switch to the left and click the APPLY
button.
To enable access via TELNET again, move the Enable Telnet switch to the right. In the Port
field, enter the number of the router's port through which access will be allowed (by default, the
port 23 is specified). Then click the APPLY button.
Figure 166. The System / Telnet page.
Page 204 of 215
Configuring via Web-based Interface
Advertisement
Table of Contents
