Basic Settings - D-Link DIR-816 User Manual

DIR-816 Wireless AC750 Dual Band Router with 3G/LTE
Support and USB Port
User Manual

Basic Settings

On the USB modem / Basic Settings page, you can view data on the USB modem connected to
the router and enable/disable the function for automatic creation of 3G/LTE WAN connection upon
plugging a USB modem into the router.
If the Automatic creation of connection switch is moved to the right and the PIN code check
for the SIM card inserted into your USB modem is disabled, then an active WAN connection with
default settings (for LTE modems) or the operator's settings (for GSM modems) will be
automatically created when plugging the USB modem into the router. The connection will be
displayed on the Connections Setup / WAN page.
If you don't want to use this function, move the Automatic creation of connection switch to
the right and click the APPLY button.
When a USB modem is connected to the router, the following data are displayed in the
Information section:
Parameter
Vendor
Model
Revision
IMSI
IMEI
Figure 122. The USB modem / Basic Settings page.
The manufacturer of your USB modem.
The alphanumeric code of the model of your USB modem.
The revision of the firmware of your USB modem.
The code stored in the SIM card inserted to your USB modem.
The code stored in the memory of the USB modem.
Page 146 of 215
Configuring via Web-based Interface
Description