D-Link DES-3550 Command Line Interface Reference Manual page 200

show authen_enable
Parameters
Restrictions
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
DES-3550 Layer 2 Fast Ethernet Switch
Adminstrator level privileges.
default – Entering this parameter will display the default method list for
users attempting to gain access to Administrator level privileges on the
Switch.
method_list_name <string 15> - Enter an alphanumeric string of up to
15 characters to define the given method list the user wishes to view.
all – Entering this parameter will display all the authentication login
methods currently configured on the Switch.
The window will display the following parameters:
Method List Name – The name of a previously configured
method list name.
Priority – Defines which order the method list protocols will be
queried for authentication when a user attempts to log on to
the Switch. Priority ranges from 1(highest) to 4 (lowest).
Method Name – Defines which security protocols are
implemeted, per method list name.
Comment – Defines the type of Method. User-defined Group
refers to server groups defined by the user. Built-in Group
refers to the TACACS, XTACACS, TACACS+ and RADIUS
security protocols which are permanently set in the Switch.
Keyword refers to authentication using a technique INSTEAD
of TACACS/XTACACS/TACACS+/RADIUS which are local
(authentication through the local_enable password on the
Switch) and none (no authentication necessary to access any
function on the Switch).
None
DES-3550:4#show authen_enable all
Command: show authen_enable all
Method List Name Priority Method Name Comment
---------------- --------
Permit 1
2
3
4
default 1
2
--------------- ------------------
tacacs+ Built-in Group
tacacs Built-in Group
Darren User-defined Group
local Keyword
tacacs+ Built-in Group
local Keyword
192