Battery And Fuse Replacement - Amprobe AM-500 User Manual

BATTERY AND FUSE REPLACEMENT

X� WARNING
To avoid shock, injury, or damage to the Meter:
Disconnect test leads before opening case.
Use ONLY fuses with the amperage, interrupt,
voltage, and speed ratings specified.
Replacing BATTERY follow below steps:
1. Disconnect the test lead probe from measuring
circuit.
2. Turn the Meter to OFF position.
3. Remove the screws from the battery cover and
open the battery cover
4. Remove the batteries and replace with two
1.5V Alkaline Batteries (AAA) or equivalent. Pay
attention to the polarity signs.
5. Put the battery cover back and re-fasten the screw.
Battery: 1.5V Alkaline Batteries (AAA) or equivalent
15