Lubrication; Steering System; Swivel Bracket And Trailering Bracket; Tilt Tube - BRP E250DHLSCS Service Manual

MAINTENANCE

LUBRICATION

LUBRICATION

Steering System

WARNING
Failure to regrease as recommended
could result in steering system corrosion.
Corrosion can affect steering effort, mak-
ing operator control difficult.
Grease the stainless steel output end of the steer-
ing cable with Triple-Guard grease.
Use an appropriate cleaning solvent to remove
corrosion and dirt from output end of cable prior to
coating it with grease. Make sure wiper nut is
installed and not damaged.
2
1. Steering cable
2. Wiper nut
76
Swivel Bracket and Trailering
Bracket
Lubricate the swivel bracket with Triple-Guard
grease.
Apply grease until the grease begins to flow from
the upper or lower swivel bracket areas.
Coat the pivot points of the trailering bracket with
Triple-Guard grease.
2
1. Grease fitting
2. Pivot points
3. Lower swivel bracket area

Tilt Tube

1
Lubricate the tilt tube grease fittings with Triple-
Guard grease.
DR29546
1. Tilt tube fittings
1 1
1
3
DR5073
DR38798