Stern Bracket; Removal; Stern Bracket Disassembly - BRP E250DHLSCS Service Manual

STERN BRACKET

Removal

Before servicing the stern bracket:
Remove gearcase. Refer to Gearcase GEAR-
•
CASE REMOVAL AND INSTALLATION on
p. 271.
Remove powerhead. Refer to POWERHEAD
•
REMOVAL on p. 215.
Remove exhaust housing. Refer to Exhaust
•
Housing Removal on p. 253.
The power trim/tilt unit must be removed. Refer
•
to TRIM AND TILT on p. 313 .

Stern Bracket Disassembly

Remove and discard steering shaft locknut.
Remove the lower mount bracket and keeper.
Remove the steering shaft and thrust washer. It
may be necessary to tap the steering shaft out
using a wood dowel and mallet.
Pry out upper and lower steering shaft seals and
discard. Remove the upper and lower steering
shaft bushings.
30738
Remove the tilt tube. Refer to TILT TUBE on
p. 251.
Remove the two tilt tube washers.
30736
MIDSECTION
STERN BRACKET
30735
30765 / 30764
12
30763
259