Radio Operations - JVC KD-G436 Instructions Manual

Radio operations

~
Ÿ
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
88.3
!
Start searching for a station.
When a station is received,
searching stops.
To stop searching, press the
same button again.
To tune in to a station manually
!
In step above...
1
2
Select a desired station frequency.
When an FM stereo broadcast is hard to
receive
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure. "MONO OFF" appears and the MO indicator
goes off.
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1
Select the FM band (FM1 – FM3) you want to
store into.
M
2
3
"SSM" flashes, then disappears when automatic
presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM band.
Lights up when monaural mode is activated.
MONO
Storing stations in memory
SSM
7